Preventing Water Damage Caused By Your Bathroom

Water damage from a toilet overflow can be quite immense and the stink that follows can make it quite worse.  Another problem with the leak is that it can damage the floors.  When there are wooden floors extensive damage may be caused.  The sewage can get blocked for any number of reasons.  If the drainpipes and waste pipes becoming choked Among the reasons can be.  They can be choked because of objects been flushed down the toilets, the buildup of grime, cracked pipes, and leakages, etc..

After assessing the water damage in the toilet leak, it is important to learn the way to block the overflow.  If the sewage can be observed is to include the overflow and the contamination.  By making use of the sterile cloth or paper stem the overflow.  Always wear rubber boots and rubber gloves and do not touch the sewage with bare palms.  You might also use masks to prevent inhalation.

The cleanup operation for the water damage from a toilet overflow or West Bloomfield flood damage should be performed in earnest.  Surplus sewage needs to be eliminated from the areas that are affected.  This can be done through a sewage suction apparatus.  Next, the area has to be cleaned and disinfected.  Ordinarily, a detergent with bleach is used for cleansing and disinfecting the affected areas.  The area which comes in contact with the sewage ought to be removed efficiently.

Sewage can penetrate the grout in the tile and the wooden flooring as well as the walls.  The wooden flooring may want to be removed and the walls will need to get dried out to prevent the development of mildew and mold.  An air purifier would also be needed to clean and purify the air and eliminate any noxious fumes and smells that still persist.

Other Causes of Water Damage

Some of the most harmful threats that could come upon a homeowner would be those which might not even be noticed at first.  Out of a handful of things that this could apply to, I must say that the threat of suffering from water damage in your house would have to rank at the peak of the list of mishaps that could happen.  There are plenty of obvious ways that your house could one day experience an uninvited intrusion of water, however, a number of the most damaging of the various ways can actually be those that you wouldn’t think to plan ahead for and therefore are out of sight for a period of time when they may happen.  

It’s typical for a homeowner that is concerned about preventing water from penetrating their house to go around the house and inspect for cracks in the base, shingles missing from your roof, or perhaps weatherstripping around doors and windows which are in poor condition and in need of replacement or repair.   There are other areas in your house that are just as vulnerable to the threat of water intrusion that will usually go totally unnoticed until it is too late and water has already come in and made its mark.

One place, actually several areas, that will need attention and that are all combined together by one thing is the pipes that are linked to your plumbing.  These pipes will travel throughout many regions of your house and are almost always neatly tucked away and out of sight.  While this may be visually attractive to you personally, it allows for many hidden areas that water can invade without being detected, and if a water leak does happen at any time, the result may easily be thousands of dollars in construction materials that will need to be replaced and the possible threat of mold damage.  The very best method to address this possible threat and prevent a catastrophe from happening is to monitor the water pressure in your house and occasionally have a plumber come to your house and inspect all your plumbing to make sure that there are no leaks or fittings which are showing excessive wear.  This may require a tiny bit of financial investment each time that the plumber pays you a visit, but it is going to save you a huge hassle and a great deal of money in repair costs down the road by avoiding the water damage that could easily come by not only doing these routine inspections and grabbing an issue ahead of time.

Another area of your house that commonly gets overlooked is situated on the very top of your house which comprises the vents and pipes which stick out of your roof.  They’re always exposed to the outside elements and as time passes, the seals that they utilize to keep water from seeping in around their bases can wear out and allow water to trickle in.  Since the water will usually drip in slowly at first and drain into your loft, and it is a very low traffic area, water may be allowed to sit for a time period and build up.  This will create an opportunity for the development and growth of mold or for your ceiling.  On a wonderful sunny day when you have someone to help you in staying safe, climb on top of your roof and take a good look at the seals around these things in your roof to be sure that there isn’t any cracking or corrosion of these seals.  Whether there aren’t any signs of wear, go ahead before water is allowed into your home and replace the seals now.

By taking these precautionary steps now, you will have the ability to save money by not needing to replace construction materials that have been damaged by water later on.

Tips To Avoid Water Damage In The Bathroom

Here are some routine toilet checkup tips to help prevent moisture or mold problems:


Most pipes are hidden in the walls and serious issues can begin invisibly.

If you hear miniature drips in the wall, take immediate action.  If a wall is moist to the touch or discolored, there’s moisture damage in improvement.  Get professional help.  If a wall in an adjoining room is moist to the touch, then there is a growing moisture problem that needs prompt investigation and repair.

Any observable leaks under the sink or around the toilet need to be fixed before they contribute to more serious and expensive moisture damage.  Signs of water damage in floors in the bathroom or adjoining rooms are a red flag of a possible water leak.  Don’t ignore it.

Exhaust Fan

One of the most crucial tools for moisture control from the toilet is the exhaust fan.  A nonfunctioning exhaust fan overloads the bathroom with an atmosphere that is damp.  Get it repaired straight away.

If the exhaust fan doesn’t come on automatically when the bathroom is in use, think about having the wiring changed so that it will.

When the area around the fan is not dry and clean, or when dust or any sort of growth has collected on the blades or inside the exhaust duct, it might be a warning sign of surplus moisture build-up.  Wash the fan and place nicely.  That the fan is operating.

Be sure the toilet exhaust fan vents to the outside, not to the home or attic.  If the exterior vent dampers don’t operate properly or do not seat well, have them replaced or fixed.


The bathroom has crucial inlet and socket functions that have to be sealed and leak-free.  Make certain there are no water line flows.  Repair even leaks instantly.  Assess for signs of discoloration or water damage on the ground.  If present, check the toilet rim seal and tank seal immediately.

When the ground around the toilet seems tender, structural damage may be occurring.  Call a Specialist on West Bloomfield property restoration.


Bathroom windows need to perform properly in a broad array of humidity and temperature conditions.  Whether there are any obvious fractures in the weather-stripping or seals, then fix them.  Malfunctioning locks and closure mechanisms should not be ignored.  If there are flaking or stains on the painted surfaces, then they need to be resealed with a fresh coat of paint and varnish.

Showers and Bathtubs

Places that are exposed to the water need close attention to prevent difficulties.  If the caulking is cracked, rigid, or loose in areas, replace it immediately.