Repairing Water Damaged Drywall Step-by-Step

In a water damage event, it is vital to swiftly eliminate the water and wash your own property. This way, you may reduce additional damage to your house’s structure and materials, such as floors, furniture, ceiling, and drywall (gypsum board). Based on the sort of flooding and in which water has intruded, the shingles must be entirely or partly replaced. Read below to understand how to fix water damaged drywall. 

Things you have to know before learning how to fix water damaged drywall

If moist drywall is brought on by an overhead flood, the ceiling can fall. In cases like this, have your house’s structure assessed by an expert restoration firm. Look for flood cleanup services to find out more.

Additionally, in the event the drywall water damage was a result of sewage backup, consult with certified professionals for repairs. This type of job entails security problems and biohazard cleaning services which are usually beyond the capacity of average homeowners.

Before repairing water damaged drywall, find and fix the water supply. Extract the water and dry the region. The longer the water stays, the larger the harm to your own shingles will be.

The best way to fix water damaged drywall

First, clear the place. Eliminate water-soaked furniture and construction materials. Additionally, remove wet carpeting and padding, or pull it back to enable the ground to air out.

Take security precautions

When removing shingles, use respiratory protection as a few old asphalt joint compounds include asbestos. Furthermore, eliminate non-affected electric outlets before ripping wall out material.

Eliminate damaged substances

Begin with determining how much money to cut away. This helps when reinstalling complete sheets of shingles. If the water level has been higher than two-and-a-half feet, eliminate the wall material to a height of eight feet or the ceiling, whichever is greater.

Eliminate any cracked, crumbling, or cracked drywall. But if it is only moist and also the water supply was sterile (e.g. a burst pipe at your house), you may probably dry it. Based upon the amount of water damage, you might also have to eliminate damaged walls studs, cabinets, flooring, and ceilings. Next, it is time to reduce the damaged parts of the drywall.

The best way to cut back

  1. Mark a straight line across the wall — over the point at which water ceased wicking — with a chalk line.
  2. Cut across the chalk line half or three-quarters of the way throughout the thickness of the drywall. To make this easier, knock on a little hole at the broken drywall using a hammer. Use the pit as a handle to pull the drywall. Even though it does not appear moist, it probably is. When it’s foam plastic insulation, then it is possible to leave it set up and let it dry.

When the damaged drywall is eliminated, begin drying the region around and in the wall. Utilize high-efficiency blowers and dehumidifiers and start the doors and windows. Use fans to improve airflow behind walls and then leave them operating at least 2 times so that the studs and floors can totally dry.

Note: prevent hitting holes in walls. This practice will not help the wall dry quicker. Additionally, it makes it more challenging to fix your own shingles.

Utilize a chemical sanitizer to prevent mold and germs from forming between partitions. Prevent bleach as it will not prevent mold from growing. Vacate the place while the ozone system is operating.

Now it is time to hang fresh drywall. First, assess the size of this hole that will assist you to understand how much to cut from a brand new sheet of drywall. Place four shingles clips around the pit and fasten every one using a drywall screw.

After that, add the drywall bits and fasten them to drywall clips. In the end, sand the place several times to get a smooth wall.

Paint the revived drywall

This is the last step in restoring water damaged shingles. First, ensure the joint chemical is totally dry as it might include a good deal of moisture. Then, paint the wall using a primer that will help seal the region. Following that, paint the whole wall to guarantee the color is uniform throughout.

For skilled drywall water damage repair, phone PuroClean!

As you have noticed, the processes of how to fix water damaged gutters are time-consuming and complicated. Everything has to be carried out quickly using the ideal methods and resources.

Do not risk additional harm by taking on the job of flooding water damage fix yourself. We use professional equipment, for example, heavy duty air movers, industrial dehumidifiers, moisture meters, and high-volume water extractors, to fast and economically dry and fix your gutters as well as the surrounding moist locations. Visit PuroClean Keller for more information.

To recap, this is the way to fix water damaged drywall:

  1. Find and resolve the water supply that caused the harm.
  2. Take security precautions — use a dust mask, rubber gloves, and switch off the circuit breaker.
  3. Eliminate the broken portions of the drywall. Cut them using a knife.
  4. Further arid the water damaged walls with fans and dehumidifiers.
  5. Replace the cut-out Parts of the drywall.
  6. Paint the restored shingles using mold resistant paint.
  7. Telephone a restoration firm to do these tasks for you fast and efficiently.